Ribbon microphone – Low distortion, flat frequency and excellent transient response. Warm and natural tone. Perfect for drums overhead, electric guitar cab, brass / horns, room mic…
KERWAX K-23R
660 € Ex. VAT - Hors Taxe
1 in stock
1 in stock
Description
Low distortion, flat frequency and excellent transient response. Warm and natural tone.
Perfect for drums overhead, electric guitar cab, brass / horns, room mic…
• Never blow directly into the ribbon
• No +48V phantom power
• Acoustic principle: electrodynamic pressure gradient
• Polar Pattern: bi-directional Figure-8
• Ribbon: 2.5-micron aluminum / 5,1 cm x 5 mm
• Magnets: neodymium
• Transformer: custom
• Frequency Response: 30 -15,000 Hz +/- 3dB
• Sensitivity: -46 dBv Re. 1v/pa
• Output Impedance: 300 Ohms
• Maximum SPL: >135dB
• Output Connector: male XLR 3 pin (Pin 2 Hot)
• Finish: stainless steel
• Dimensions: 200 mm x 30 mm
• Weight: 455 g
Handcrafted by Kerwax in Brittany
Additional information
| Weight | 0,455 kg |
|---|---|
| Dimensions | 20 × 3 × 3 cm |
